AC Repair Services › Freon Leak Repair
Freon Leak Repair in Sioux Falls, SD
When refrigerant leaks, the system slowly loses its ability to move heat — and just adding more refrigerant without fixing the source is a waste of money. Leak repair means locating exactly where refrigerant is escaping, fixing that component, and confirming the repair holds before recharging the system. It's diagnostic work first, repair second.
Sioux Falls AC Repair Pros provides freon leak repair for homeowners across Sioux Falls, SD. Call for a free inspection and a written quote before any work begins.
When to Call
When You Need Freon Leak Repair
- You've had your system recharged before but cooling performance dropped again within a year
- A technician told you there's a leak but didn't find or fix the exact location
- You see oily residue around refrigerant lines or the outdoor unit connections
- Your system is older R-22 equipment and you want to know if repair makes sense versus replacement
- The evaporator coil has been flagged as corroded or pinhole-leaking on a previous visit
- Your AC runs fine in spring but struggles by midsummer as charge slowly drops
How It Works
Our Process for Freon Leak Repair
- 1
System pressure assessment
We connect gauges and read what's actually in the system. A very low reading versus a slightly low reading changes where we look first and how we approach the search.
- 2
Electronic leak detection
We use a calibrated electronic detector and work through the common failure points — Schrader valves, line set connections, evaporator coil, and condenser coil — methodically, not randomly.
- 3
UV dye tracing if needed
Some leaks are small and slow. If the electronic detector doesn't give a clear source, we introduce UV dye, run the system, and come back to trace exactly where it surfaces.
- 4
Repair options explained
Once we find the leak, we tell you what fixing it actually involves — brazing a fitting, replacing a valve, or swapping a coil. We include honest input on whether repair makes sense on an older system.
- 5
Repair and pressure test
We make the repair, then pressurize the system with nitrogen and hold it for a set period before adding refrigerant. This confirms the fix actually holds.
- 6
Recharge and verification
After a successful pressure test, we recharge to spec and measure operating temperatures and pressures to confirm the system is performing correctly end to end.
What's included
- Electronic leak detection scan of all accessible refrigerant circuit components
- UV dye introduction and tracing if the leak source isn't immediately identified
- Repair of the identified leak point — fitting, valve, or minor line repair
- Nitrogen pressure test to confirm the repair holds before refrigerant is added
- Refrigerant recharge to manufacturer specification after confirmed repair
- Post-repair performance check with pressure and temperature measurements
What's not included
- Evaporator or condenser coil replacement — if the coil itself is the source, that's a larger separate repair with its own quote
- Refrigerant cost is not bundled into the leak repair — it's itemized separately based on quantity needed
- Line set replacement due to physical damage or age is outside the scope of a standard leak repair
Real Situations
Common Scenarios in Sioux Falls
A homeowner near the Great Plains Zoo neighborhood has had their system topped off with refrigerant two summers in a row by different companies, and it's warm again.
Two recharges with no leak repair means the leak was never found — or never addressed honestly. We do a full leak search, document what we find, and give a straight answer on repair versus replacement before anyone spends more money on refrigerant.
A newer home in the Tea or Harrisburg area has a system under ten years old that's been slowly losing charge, and the homeowner is worried about the cost.
Formicary corrosion in evaporator coils is common in this region due to certain airborne compounds reacting with copper. We check the coil carefully. If it's a pinhole in the coil versus a leaking fitting, those are very different repairs and we quote them separately.
An older home in the historic Jefferson neighborhood has an R-22 system with a confirmed leak, and the homeowner wants to know if it's worth fixing.
We give an honest answer based on the age of the equipment, the cost of R-22 refrigerant, and the scope of the repair. Sometimes the right answer is repair. Sometimes replacement makes more financial sense. We lay out both options without steering toward the bigger job.
Sioux Falls Context
Why this matters in Sioux Falls
Sioux Falls homes — especially those built in the 1990s through mid-2000s in developments on the south and west sides — often have evaporator coils that are now 15 to 20 years old. Formicary corrosion, which eats small pinholes in copper coils, is a known issue in this region and often goes undiagnosed for seasons. Getting to the actual source of a leak matters more here than a quick recharge.
Straight Talk
About pricing & scope
What drives cost is where the leak is and what it takes to fix it. A leaking Schrader valve is a quick fix. A leaking evaporator coil is a different conversation entirely. We quote each scenario separately and don't bundle coil replacement into a leak repair call without your knowledge. Refrigerant quantity needed is another variable that affects total cost.
What This Fixes
Problems We See in Sioux Falls
More AC Repair Services
Freon Leak Repair Near You